MONASET Specifications

Capacity
Workhead:

Swing over main slide, max dia................................ 12" (304mm)
Collet work dia, max........... 1.25" (31mm) min.......... 0.12" (3mm)
Lead generated by spiral lead mechanism, min...........1.81" (45mm)
Length between spindle noseand tail center, max........6" (152mm)
Wheelhead
Grinding Wheel dia. max...........................................4" (101mm)

Range
Workhead:

Main slide travel........................................................5.75" (146mm)
Offset slide travel, total..............................................5.25" (133mm)
- front of center, 3" (76mm)
- Rear of center, 2.25" (57mm)
Workhead angular adjustment:
Horizontal plane (turntable base)................................235 degrees
Vertical plane,
- above center.........................................................40 degrees
- below center.........................................................40 degrees
Wheelhead:
Longitudinal slide travel.............................................6" (152mm)
Vertical slide travel, total...........................................9.50" (241mm)
- above center, 4.50" (114mm)
- below center, 5" (127mm)

Cross slide travel, total.............................................7.50" (190mm)
- front of center, 3" (76mm)
- Rear of center, 4.50" (114mm)

Spindle Speeds
(±0%,-8% variation allowable)
Workhead, one speed.............................................436 RPM
Wheelhead, three speeds........................................4000, 5729 and 8000 RPM
(motor speed @ 3600 rpm)
Internal Grinding Attachment (Extra Cost) three speeds ...........16410,23510, and 32820 (approx.)
Motors, Electric
Workhead drive, AC ................ includes reverse 1/4 hp (.186 kilowatts)
Wheelhead drive, AC ........................................1/2 hp (.373 kilowatts)
Floor Space Weight
Area of base only....................................................................................25" x 26" (635mm X 660mm)
Area required for machine (including swivel and overtravel movements).........60" X 67" (1524mm X 1701mm)
Height from floor to center of workhead spindle .........................................47.72" (1212mm)
Height, overall with wheelhead raised........................................................62.12" (1577mm)
Netweight (including motors and controls).................................................1525 Ibs (691 kilograms)

 
 


Return to MONASET page..
.